PUBLICATIONS

Book and Book Chapters

  1. Developments in Theoretical and Applied Mechanics, Volume XXII, Editors: Hassan Mahfuz and Mahesh V. Hosur, ISBN 0-615-12639-1, August 2004, Tuskegee University, Tuskegee, AL.
  2. Hassan Mahfuz, “Structural Nanocomposites,” in Nanoengineering of Structural, Functional, and Smart Materials, (eds Mark Schulz, Ajit Kelkar and Mannur Sundaresan), Catalog no. 1653, May 2005, 712 pp., ISBN: 0-8493-1653-7, CRC Press, Boca Raton, Florida.
  3. Mahfuz, H., Saha, M., Biggs, R. and Jeelani, S., "Damage Tolerance of Resin Infiltrated Composites After Low Velocity Impact - Experimental and Numerical Studies," Key Engineering Materials, Vol. 141-143 (1998), 209 pp., ISSN: 1013-9826, Trans Tech Publications, Switzerland.
  4. Haque, A., Rahman, M., Vaidya, U., Mahfuz, H. and Jeelani, S., "Tensile Behavior of Woven Ceramic Matrix Composites at Room and Elevated Temperature: An Experimental and Numerical Study," Key Engineering Materials, Vols. 164-165 (1999), 341 pp., ISSN: 1013-9826, Trans Tech Publications, Switzerland.
  5. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. and Jeelani, S., "Stress Wave Propagation through Fiber and Matrix in a Cylindrical Composite Coupon," Physics and Modern Topics in Mechanical and Electrical Engineering, 151 pp., ISBN: 960-8052-10-6), World Scientific and Engineering Society Press.
  6. Gama, B., Bogetti, T., Fink, B.,Mahfuz, H., and Gillespie, J., “Modeling and Simulation of the Dynamic Behavior of EPDM Rubber under Stress Wave Loading,” Physics and Modern Topics in Mechanical and Electrical Engineering, 144 pp, ISBN: 960-8052-10-6, World Scientific and Engineering Society Press.
  7. Hassan Mahfuz, Shaik Zainuddin, Mohammed F. Uddin, Vijaya K. Rangari and Shaik Jeelani, “Fatigue of Pure and Nanophased Sandwich Composites under Shear Loading,” in Sandwich Structures 7: Advancing with Sandwich Structures and Materials, January 2006, 183 pp, ISBN 978-1-4020-3444-2, Springer Netherlands, P.O. Box 17, 3300 AA, Dordrecht, Netherlands.
  8. Yuanxin Zhou, Hassan Mahfuz, Vijaya Rangari and Shaik Jeelani, “An Experimental and Analytical Study of Unidirectional Carbon Fiber Reinforced Epoxy Modified by SiC Nanoparticles," In: Composite Materials Research Progress, Editor: Lucas P. Durand, pp 129-164, 2008, ISBN: 1-60021-994-2.
  9. Khan, M. and Mahfuz, H., “Nanoscale reinforcement of polymer textile fibers," in Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publishers, in press, May 2017.

Patent

Patent: U.S. Patent No. 6,934,600, "Nanotube Fiber Reinforced Composite Materials and Method of Producing Fiber Reinforced Composites," Issue Date – August 23, 2005, Inventors – B. Zeng, J. Li, S. Chen, Z. Li, H. Mahfuz and A. Adnan.

Conference Papers and Presentations

  1. Case, R.O. and Mahfuz, H., "Photoelastic Analysis of a Metal-to-Metal Contact Bolted Flange Connection", Proc. of the 1986 SEM Spring Conference, New Orleans, June 8-13, 1986, pp. 881-886.
  2. Case, R.O. and Mahfuz, H., "Photoelastic Analysis of Bolts Subjected to Prying in a Thin-Walled Flange Connection", Proc. of the 1987 SEM Spring Conference, Houston, June 14-19, pp. 559-562.
  3. Mahfuz, H., Case, R.O. and Wong, Tin-Lup, "Whole-Field Stress Analysis Using Digitized Photoelastic Data and Numerical methods", Proc. of the VI International Congress on Experimental Mechanics, June 6-10, 1988, Vol. 2, pp. 1208-1214.
  4. Mahfuz, H., Case, R.O. and Wong, Tin-Lup, "Separation of Principal Stresses within an Arbitrary Digitized Boundary by Hybrid Techniques", Proc. of the 1989 SEM Spring Conference on Experimental Mechanics, May 29-June 1, pp. 565- 577.
  5. Mahfuz, H., Wong, Tin-Lup and Case, R.O. "Photoelastic Data Acquisition by Digitizing Technique Over Arbitrary Boundaries", Proc. of the 1990 SEM Spring Conference on Experimental Mechanics, June 4-6, pp. 658-664.
  6. Case, R.O., Stevens, K.K., Gonella, J.C. and Mahfuz, H., "Photoelastic of a High- Pressure Vessel with Threaded closure- Part I", Proc. of the 1990 SEM Spring Conference on Experimental Mechanics, June 4-6, pp. 125-128.
  7. Mahfuz, H., Partha, S.D., Jeelani, S., Baker, D.M. and Johnson, S., "Fatigue and Flexural Response of Advanced Carbon-Carbon Composites at Room and Elevated Temperatures", Ceramic Engineering & Science Proceedings, Vol. 1, pp. 449-468, 1992.
  8. Mahfuz, H., Partha, S.D., Jeelani, S., Baker, D.M. and Johnson, S., "Fatigue Characterization of Advanced Carbon-Carbon Composites," Proceedings of the 1992 SEM VII International Congress on Experimental Mechanics, Vol. 2, pp. 1368-1373, 1992.
  9. Mahfuz, H., Dongwei Xue, Jeelani, S., Baker, D.M. and Johnson, S., "Non-Linear Response of 2-D Carbon-Carbon Composites by Layered Shell elements", Developments in Theoretical and Applied Mechanics, Vol. 16, pp. III.1.62 - 72, 1992.
  10. Mahfuz, H., Xue, D., Jeelani, S., Baker, D. and Johnson, S., "Experimental and Finite Element Analysis of Advanced Carbon-Carbon (ACC-4) Composite under Tensile Loading," Proceeding of the International Conference on Advanced Composites, Sydney, Australia February 1993, Vol. 1, pp. 1369-1395.
  11. Mahfuz, H., Partha, S.D., Xue, D., Krishnagopalan, J. and Jeelani, S., "A combined Experimental and Finite Element Study to Predict the Failure Mechanisms in SiC Coated Carbon/Carbon Composites at Room and Elevated Temperatures Under Flexural Loading," International Conference on Composite Materials (ICCM/9), Madrid, Spain, July 12-16, 1993, Vol. 2, pp. 508-515.
  12. Mahfuz, H., Das, P., Xue, D. and Jeelani, S., "Response of SiC Coated Carbon/Carbon Composites under Flexural Loading- A Combined Experimental and finite Element Study," 3rd International Symposium on Advanced Materials (ISAM/3), Islamabad, Pakistan, Sept. 20-25,1993, Vol. 1, pp. 685-695.
  13. Sulaiman, A., Yang, J., Jeelani, S. and Mahfuz, H., "Stress and Stability Analysis of Thick Fiber reinforced Laminated Composite Plates Using Finite Element Method", Computers in Engineering - 1993, ASME, Vol. 1, pp. 499-506.
  14. Vaidya, U., Mahfuz, H., and Jeelani, S., "Vibration and Ultrasonic Nondestructive Characterization of Non-woven and Fabric Reinforced Carbon/Carbon Composites", 25th International SAMPE Conference, Philadelphia, Oct. 26-28, 1993, pp. 347-352.
  15. Haque, A., Mahfuz, H., Yu, T. and Jeelani, S., "Effect of Processing Parameters on Property Changes of Resin Transfer Molded Materials", 25th International SAMPE Technical Conference, Philadelphia, Oct. 26-28, 1993, Vol. 25, pp. 305- 319.
  16. Mahfuz, H., Zadoo, D., Wilks, F., Maniruzzaman, M. and Jeelani, S., "Fracture and Flexural Characterization of Monolithic SiC and SiCW/SiC Composites at Room and Elevated Temperatures", 18th Annual Conference, American Ceramic Society (ACerS), Vol. 15, No. 4, pp.219-232.
  17. Vaidya, U.K., Mahfuz, H. and Jeelani, S., "NDE of Structural and Functional Carbon-Carbon Composites after First Carbonization", 18th Annual Conference, American Ceramic Society (ACerS), Vol. 15, No. 4, pp. 591-598.
  18. Vaidya, U.K., Mahfuz, H. and Jeelani, S., "Development and Nondestructive Characterization of Non-woven Carbon Composites" INDA Conference, July 26- 29, 1994, Vol. 1, pp. 31-37.
  19. Vaidya, U.K., Mahfuz, H. and Jeelani, S., "NDE of Structural and Functional Carbon-Carbon Composites", ASME Winter Annual Meeting, Chicago, Nov. 6-11, 1994, NCA-Vol. 18, pp. 103-109.
  20. Vaidya, U.K., Mahfuz, H. and Jeelani, S., "Hybridization Concepts and NDE of Carbon-Carbon Composites", 26th Intl. SAMPE Conference, Atlanta, GA, Sept 94, Vol. 26, pp. 483-490.
  21. Mahfuz, H., Haque, A., Grant, G. and Jeelani, S., "Fracture Behavior of SiCf/Si3N4 Composites", First International Conference on Composites Engineering (ICCE/1), August 28-31, 1994, Vol. 1, pp. 319-320.
  22. Vaidya, U., Mahfuz, H. and Jeelani, S., "NDE of Innovative Hybrid Functional Carbon Fiber Composites", First International Conference on Composites Engineering (ICCE/1), August 28-31, 1994, Vol. 1, pp. 538-539.
  23. Mahfuz, H., Maniruzzaman, M., Vaidya, U.K., Krishnagopalan, J. and Jeelani, S., "Fatigue Damage and Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon Composites", International Conference on Design and Manufacturing using Composites (ATMAM '94), August 10 -12, 1994, Vol. 1, pp. 488-492.
  24. Mahfuz, H., Haque, A., Yu, D., Robinson, D. and Jeelani, S., "Reverse Fatigue of Resin Transfer Model Composites", International Conference on Design and Manufacturing using Composites (ATMAM '94), August 10 -12, 1994, Vol. 1, 23-32.
  25. Mahfuz, H., Mian, A.K.M. A., Vaidya, U. and Jeelani, S., "Prediction of Fiber- Matrix Interface Failure due to Longitudinal Tensile Loading using Finite Element Methods", Materials Research Society (MRS) 1994 Fall Meeting, Nov. 29-Dec. 2, 1994, Boston, Massachusetts, Mat. Res. Soc. Symp. Proc. Vol. 365, pp. 229-236.
  26. Vaidya, U., Mahfuz, H. and Jeelani, S., "Nondestructive Evaluation/ Characterization of Hybrid and Sandwich Carbon/Carbon Composites," 19th Annual Conference, American Ceramic Society (ACerS), Jan. 8-12, 1995, Cocoa Beach, Florida, Vol. 16, No. 4., pp. 289-298.
  27. Mahfuz, H., Saha, M, Haque, A., Vaidya, U. and Jeelani, S., "Fatigue Damage and Residual Strength of Resin Transfer Molded Composites Under Reversed Cyclic Loading," Innovative Processing and Characterization of Composite Materials, ASME 1995, NCA-Vol. 20/AMD-Vol.21 1, pp. 77-88.
  28. Mahfuz, H., Vaidya, U., Maniruzzaman, M., Brown, T. and Jeelani, S., "Room and High Temperature Fatigue Damage Evaluation of SiCf/Si3N4 Composites", 19th Annual Conference, American Ceramic Society (ACerS), Jan. 8-12, 1995, Cocoa Beach, Florida, Ceramic Engineering find Science proceedings, Vol. 16, No. 4, pp. 351-360.
  29. Vaidya, U., Haque, A., Mahfuz, H., and Jeelani, S., "Effect of Short Fiber Reinforcement Modification and Fabric Architecture on Ultrasonic and Acoustic Emission Parameters of Carbon/Phenolic and Carbon Composites", 4th Annual Research Symposium, American Society of Nondestructive Testing (ASNT), March 21-23, 1995, pp. 244-246.
  30. Mahfuz, H., Saha, M., Vaidya, U. and Jeelani, S., "Impact Damage and Residual Strength of Resin Infiltrated Toughened Graphite/Epoxy Panel", The 10th International Conference on Composite Materials (ICCM-10), August 1995, Vancouver, Canada, Vol. V, pp. 671-678.
  31. Vaidya, U., Mahfuz, H. and Jeelani, S., "Acoustic-Ultrasonic Characterization of Carbon-Carbon Composites with Stretch Broken Fabric Architecture", 10th International Conference on Composite Materials (ICCM-10), August 1995, Vol. V, pp. 511-526.
  32. Mahfuz, H., Saha, M., Vaidya, U., Biggs, R. and Jeelani, S., "Prediction of the Dynamic Response of Toughened Graphite/Epoxy Composite Plates at Low Velocity Impact - A Numerical Study", 27th International SAMPE Technical Conference, October 1995, Albuquerque, New Mexico, Vol. 27, pp. 830-842.
  33. Vaidya, U., Wheeler, R., Mahfuz, H. and Jeelani, S., "Compression Behavior and NDE of Stiffened Panels"v, 27th International SAMPE Technical Conference, October 1995, Albuquerque, New Mexico, Vol. 27, pp. 711-721.
  34. Haque, A., Vaidya, U. Mahfuz, H. and Jeelani, S., "Effect of Fiber Orientation on HSR Response of Glass Fiber Reinforced Composites," 28th International SAMPE Technical Conference, Seattle, WA, Oct. 12-15, 1996.
  35. Haque, A., Vaidya, U. Mahfuz, H. and Jeelani, S., "NDE of Thick Section Composites under Static Compression and Cyclic Loading," 14th World Conference on Nondestructive Testing, Dec 6-13, 1996, New Delhi, India, Vol. 5.
  36. Vaidya, U., Fotedar, K., Mahfuz, H. and Jeelani, S., "Process Related Defects and High Strain Rate Impact Damage Evaluation of Resin Transfer Molded Composites Through a Comprehensive NDE Approach," 14th World Conference on Nondestructive Testing, Dec 6-13, 1996, New Delhi, India, Vol. 5.
  37. Vaidya, U. Haque, A., Mahfuz, H. and Jeelani, S.,"Sensor-Property-NDE Relationships of Polymeric Composites Processed Through Resin Infusion," Smart Materials, Structures and MEMS, SPIE-96, Proceedings of SPIE, Vol. 331, pp. 654-667, Dec. 11-14, 1996, Bengalore, India.
  38. Mahfuz, H., Gama, B., Raines, R. and Jeelani, S., "High Strain Rate Behavior of Woven Composites," 5th International Conference on Composites Engineering (ICCE - 4), Hawaii, July 6-11, 1997, Vol. 1, pp. 631-632.
  39. Haque, A., Johnson, J., Vaidya, U. and Jeelani, S.,"Static Compression and Compression-Compression Fatigue of S2-Glass/Vinyl-Ester Composites," 4th International Conference on Composites Engineering (ICCE - 4), Hawaii, July 6-11, 1997, Vol. 1, pp. 408-409.
  40. Vaidya, U., Krishnagopalan, K., Haque, A., Mahfuz, H. and Jeelani, S., "Non- Destructive Characterization and Low Velocity Impact Response of Integral Armor Components," 4th International Conference on Composites Engineering (ICCE - 4), Hawaii, July 6-11, 1997, Vol. 1, pp. 1009-1010.
  41. Mahfuz, H., Gama, B., Raines, R. and Jeelani, S., "High Strain Rate Behavior of the Component Materials of an Integral Armor," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 614-624.
  42. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. and Jeelani, S., "Finite Element Analysis of Composite Isogrid Cylinders," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 577-589.
  43. Mahfuz, H., Eltom, K., Das, P., Vaidya, U. and Jeelani, S., "High Frequency Fatigue of Continuous Silicon Carbide Fiber Reinforced Silicon Nitride Matrix Composites," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 128-141.
  44. Vaidya, U., Kamath, M., Mahfuz, H. and Jeelani, S., "Manufacturing and Low Velocity Impact Response of Innovative Sandwich Composites," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 713-724.
  45. Vaidya U., Abraham, A., Mahfuz, H. and Jeelani, S., "Manufacturing of Composite Integral Armor Using Liquid Molding Process," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997 , pp. 523-531.
  46. Haque, A., Ali, M., Mahfuz, H. and Jeelani, S., "Rate Dependent Compressive Response of S2-Glass/Vinylester Composites," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 698-712.
  47. Mahfuz, H., Lokesh, B., Das, P. Vaidya, U. and Jeelani, S., "Finite Element Modeling and Photoelastic Analysis of an Integral Armor Under Flexural Loading," NCA-Vol. 24, Proceedings of the ASME Noise Control and Acoustic Division, ASME 97, pp. 235-246, 1997.
  48. Vaidya, U., Kamath, M., Mahfuz, H. and Jeelani, S., "Low Velocity Impact Response of Unconventional Sandwich Composites," Proceedings of the American Society for Composites, pp. 562-571, October 6-8, 1997, Dearborn, MI.
  49. Haque, A., Vaidya, U., Ali, M., Fotedar, K., Mahfuz, H. and Jeelani, S., "Effects of Fiber Orientation on High Strain Rate Behavior of Glass/Epoxy Composites," Engineering and Architecture Symposium, Prairie View A&M University, February 6-7, pp. 491-98, 1997.
  50. Vaidya, U., Abraham, A., Hosur, M.V., Kumar, P., Haque, A., Mahfuz, H, and Jeelani, S., "Manufacturing of Thick Section Composites Using Low Cost Liquid Molding Processes," 19th SECTAM Conference on Theoretical and Applied Mechanics, 1998, pp. 139-150.
  51. Mahfuz, H., Lokesh, B., Vaidya, U. and Jeelani, S., "Experimental and Finite Element Hybrid Stress Analysis of Thick Section S2-Glass Composites," Developments in Theoretical and Applied Mechanics, Vol. 9 (I 998), pp. 117- 128.
  52. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. and Jeelani, S., "Response of Composite Isogrid Cylinders Under Axial Compression," 2nd International Conference on Composite Science and Technology (ICCST/2), June 9-11, 1998, Vol. 1, pp. 325-331.
  53. Mahfuz, H., Rahman, M., Haque, A., Foster, E. Vaidya, U. and Jeelani, S., "Buckling Analysis of Composite Isogrid Cylinders using Finite Element Method," International Conference on Advanced Composites, Hurghuda, Egypt, December 1998, pp. 673-682.
  54. Vaidya, U., Hosur, M., Kumar, P., Earl, D., Cloyd, M., Mahfuz, H., Haque, and Jeelani, S., "High Strain Rate Response of Sandwich Composites with Integrated PARABEAM Core," International Conference on Advanced Composites, Hurghuda, Egypt, December 1998, pp. 215-226.
  55. Motuku, M., Janowski, G., Vaidya, U., Mahfuz, H. and Jeelani, S., "Low Velocity Impact Response of Vinyl Ester 350 and C50 Neat Resins," Proceedings of the ASME, NCA-Vol. 25, pp. 283-296, 1998.
  56. Vaidya, U. Mohan, P., Mahfuz, H. and Jeelani, S., "Low Velocity and High Strain Rate Impact of Pin Reinforced Foam Core Sandwich Composites," Proceedings of the Japan-US Conference on Composite Materials, Sept. 24-25, 1998, pp. 721-729.
  57. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. and Jeelani, S., "Response of Fiber and Matrix in Composites under High Strain Rate Loading," Proceedings of the SEM Annual Conference on Theoretical, experimental and Computational Mechanics, June 7-9, 1999, Vol. 1, pp. 559-564.
  58. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. and Jeelani, S., "S-N Characterization and Cyclic Life Prediction of Thick-Section Composites Under Flexural Loading," Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, June 7-9, 1999, Vol. 1, pp. 630- 635.
  59. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. and Jeelani, S., "Fatigue Life Prediction of Thick-Section Woven Composites Under Flexural Loading," 6th International Conference on Composites Engineering (ICCE - 6), June 27 - July 3, 1999, Orlando, Florida, Vol. 1, pp. 537-538.
  60. Vaidya, U., Jadhav, N., Mahfuz, H. and Jeelani, S., "Parametric Dielectric Sensing Studies in Vacuum Assisted Resin Transfer Molding," 6th International Conference on Composites Engineering (ICCE - 6), June 27 - July 3, 1999, Orlando, Florida, Vol. 1, pp. 857-858.
  61. Mahfuz, H., Mamun, W., Hisham, M., Vaidya, U. Haque, A. and Jeelani, "High Strain Rate Response of resin Infusion Molded Sandwich Composites," ASME 1999, AMD-Vol. 235, Thick Composites for Load Bearing Structures, pp. 105-112.
  62. Haque, A., Rahman, M., Mahfuz, H., Vaidya, U. and Jeelani, S., "Durability and Damage Development in Woven Ceramic Matrix Composites under Tensile and Fatigue Loading at Room and Elevated Temperatures," MD-Vol. 86, Durability and Damage Tolerance of Composite Materials and Structures, 1999 ASME International Mechanical Engineering Congress, Nashville, TN.
  63. Mahfuz, H., Zaman K., Hisham, M., Vaidya, U. Haque, A. and Jeelani, "Fatigue Modulus Concept and Life Prediction of Thick-Section S2-Glass/Vinylester Composites Under Flexural Loading," ASME 1999, MD-Vol. 86, AMD-Vol. 232, Durability and Damage Tolerance of Composite Materials and Structures, pp. 101-106.
  64. Mahfuz, H., Zhu, Y., Mamun, W., Haque, A. and Jeelani, S., "Failure Analysis of Hybrid Armor Under High Velocity Impact," ASME 2000, AMD-Vol. 243, Dynamic Failure in Composite Materials and Structures, pp. 115-127.
  65. Gama, B., Gillespie, J., Mahfuz, H., Bogetti, T. and Fink, B., "Effect of Non-linear Material Behavior on the Through-Thickness Stress wave Propagation in Multi-Layer Hybrid Lightweight Armor," Advances in Computational Engineering & Sciences, Volume 1, pp. 157-162, 2000.
  66. Mahfuz, H., Islam, S., Carlsson, L, Atkins, M. and Jeelani, S., "Effect of Implanted Delamination and Core Density on the Buckling Behavior of Sandwich Composites," ASME 2000, AD-Vol. 62, AMD-Vol. 245, Mechanics of Sandwich Structures, pp. 143-150.
  67. Mahfuz, H., Mamun, W., Vaidya, U., Haque, A. and Jeelani, S., "Response of Foam-Core Sandwich Composites at High strain Rate," Developments in Theoretical and Applied Mechanics," Vol. 20, pp. 1-7, 2000.
  68. Mahfuz, H., Islam, S., Carlsson, L., Kardomateas, G. And Jeelani, S., “Buckling Response of Sandwich Composites: Effect of Core Density and Implanted Interface Cracks," 13th International Conference on Composite Materials (ICCM-13), June 25-29, 2001, CD Proceedings, Paper ID:1452.
  69. Mahfuz, H., Maniruzzaman, M., Zaman, M., Kulkarni, N., and Jeelani, S., "Response of Advanced Composites under Cyclic Loading; Recent Advances in Numerical and Experimental Approaches," Keynote Paper, BSME-ASME International Conference on Thermal Engineering, 2001, Vol. 1, pp. 120-132.
  70. Hassan, ABM, Mahfuz, H., Saha, M., Jeelani, S., Rahim, K. and Suhling, J., "Finite Element Analysis of Flip Chip Packages," Developments in Theoretical and Applied Mechanics, Volume 11, pp. 65-72, 2002.
  71. Joarder, C., Mahfuz, H., Saha, M., Jeelani, S., Srinivason, D., Joseph, B., Thomas, M. and Christensen, S.,"Design and Analysis of Co-Injection Resin Transfer Molding (CIRTM) Sandwich T-joints," Developments in Theoretical and Applied Mechanics, Volume 11, pp. 201-210, 2002.
  72. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S., "Temperature and Rate Sensitivity of Polymer Foam Cores," Developments in Theoretical and Applied Mechanics, Volume 11, pp. 217-226, 2002.
  73. Kanny, K., Mahfuz, H., Thomas, T and Jeelani, S., "Effects of Loading Frequency on the Fatigue Behavior of Sandwich Composites," Developments in Theoretical and Applied Mechanics, Volume 11, pp. 285-294, 2002.
  74. Kulkarni, K., Mahfuz, H., Carlsson, L., and Jeelani, S., "Flexural Fatigue Characterization of PVC Foam Core Sandwich Composites," Developments in Theoretical and Applied Mechanics, Volume 11, pp. 295-304, 2002.
  75. Kanny, K., Mahfuz, H., Thomas, T., and Jeelani, S.,” Static and Dynamic Characterization of Polymer Foams Under Shear Loads," CD Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October 2002, Paper No. 2013.
  76. Thomas, T., Mahfuz, H., Kanny, K., Jeelani, S., “High Strain Compression of Cellular Foam Core Sandwich Composites at Sub-ambient Temperatures", CD Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October 2002. Paper No. 2012.
  77. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F., Jeelani, S., and Thomas, M.M. Composite Skin-Stringer Assembly: Innovative Manufacturing and Stability Analysis." CD Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October 2002. Paper No.183.
  78. Mahfuz, H., Islam, S. and Jeelani S., "Flexural Response of Sandwich Composites with Nanophased Cores," 6th International Conference on Sandwich Constructions (ICSC6), Fort Lauderdale, Florida, April 2003, Vol. 1, pp. 213-226.
  79. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S., "Dynamic Compression of Foam Core Sandwich Composites," 6th International Conference on Sandwich Constructions (ICSC6), Fort Lauderdale, Florida, April 2003, Vol. 1, pp. 410-417.
  80. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S., "Shear Fatigue Behavior of PVC Foams” 6th International Conference on Sandwich Constructions (ICSC6), Fort Lauderdale, Florida, April 2003, Vol. 1, pp. 513-521.
  81. Kanny, K. Mahfuz, H., Thomas, T. and Jeelani, S., "An Analytical model for life prediction of closed cell structural PVC cores," ANTEC conference proceedings, ISSN 1539-2252, 2004, vol. 3, pp. 3140-3159.
  82. Mahfuz, H., Adnan, A., Rangari, V. and Jeelani, S., "Carbon nanoparticles/whiskers reinforced composites and their tensile response," 48th International SAMPE Symposium, May 11-15, 2003, Vol. 48, pp. 2559-2571.
  83. Mahfuz, H., Adnan, A., Rangari, V. and Jeelani, S., "Carbon nano-whisker reinforced composites: manufacturing and characterization," 2003 SEM Annual Conference on Experimental and Applied Mechanics, Charlotte, NC, preprint 199, June 2-4, 2003.
  84. Mahfuz, H., Islam, M., Rangari, V. and Jeelani, S., "Processing Synthesis and Flexural Characterization of Nanophased Polyurethane Foams," CD Proc. American Society for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22, 2003, Paper 220.
  85. Mahfuz, H., Saha, M., Chakravarty, U. and Jeelani, S., "Energy Absorption at Various Strain Rates by Sandwich Core Materials – Analytical and Experimental Investigation," CD Proc. American Society for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22, 2003, Paper 227.
  86. Mahfuz, H., Ashfaq, A., Rangari, V., Jasiuk, I. and Jeelani, S., "Effects of Micron and Nanosized SiC Particles on the Mechanical Properties of Epoxy Nanocomposites," CD Proc. American Society for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22, 2003, Paper 238.
  87. Gorenstein, N. Friedman, A., Mahfuz, H., Ashfaq, A., Rangari, V. and Jeelani, S., "Synthesis, Processing, and Mechanical Characterization of Epoxy-Protein Nanocomposites," CD Proc. American Society for Composites, 18th Annual Tech. Conf., Gainesville, Florida, October 19-22, 2003, Paper 240.
  88. Jeff Jordan, Iwona Jasiuk, Mahfuz, H. and Rina Tannenbaum, "Nano Versus Micro Size Reinforcement in Polymer Matrix Composites," presented at the 2003 ASME International Mechanical Engineering Congress, Washington, DC, November 15-21, 2003.
  89. Mahfuz, H., Ashfaq, A., Rangari, V., and Jeelani, S., "Characterization of Carbon Nanotube Reinforced Filaments and their composites," presented at the 2003 ASME International Mechanical Engineering Congress, Washington, DC, November 15-21, 2003.
  90. Chisholm, N, Mahfuz, H., Rangari, V., Rodgers, R. and Jeelani, S., "Synthesis and Mechanical Characterization of Carbon/Epoxy Composites Reinforced with SiC nanoparticles," NSTI-Nanotech 2004, ISBN 0-9728422-09-2, Vol. 3, pp. 302-307.
  91. Mahfuz, H., Uddin, M., Rangari, V., and Jeelani, S., ”High Strain Rate Response of Sandwich Composites with Nanophased Cores," 2004 SEM X International Congress on Experimental and Applied Mechanics, Costa Mesa, California, June 7-10, 2004.
  92. Uddin, M., Saha, M., Mahfuz, H., Rangari, V. and Jeelani, S., "Strain Rate effects on Nanophased Polyurethane Foams," SAMPE 2004, May 16-20, 2004, Long Beach, CA, CD Proceedings.
  93. Salekeen, S., Nana, J., Mahfuz, H., and Jeelani, S., "Thermal Shock Behavior of Nicalon Fiber SiCN Ceramic Matrix Composites," SAMPE 2004, May 16-20, 2004, Long Beach, CA, CD Proceedings.
  94. Mahfuz, H., Baseer, M., Rangari, V., and Jeelani, S., "Fabrication, Characterization and Mechanical Properties of Nanophased Carbon Prepreg Laminates," SAMPE 2004, May 16-20, 2004, Long Beach, CA, CD Proceedings.
  95. Hasan M., Mahfuz, H., Rangari, V. and Jeelani, S., "Thermal and Mechanical Characterization of Nylon-6 Filaments Infused with Nanoparticles", 2004 SECTAM Proceeding, Volume 22, August 15-17, Tuskegee, AL, pp. 49-58.
  96. Baseer, M.A. Mahfuz, H., Rangari, V.J., Zhou, Y., and S. Jeelani, "Evaluation of Thermal and Mechanical Properties of Nanophased Carbon Prepregs," CD Proc. American Society for Composites 19th Annual Tech. Conf., Atlanta, Georgia, October 17-20, 2004, Paper NT-22.
  97. Salekeen, S., Rahman, M.M., Mahfuz, H., and Jeelani, S., "Long-term Creep and Creep Rupture Behavior of Woven Ceramic Matrix Composites at Elevated Temperatures," Proceedings of IMECE2004-60936, 2004 ASME International Mechanical Engineering Congress, Anaheim, California, November 13-19, 2004.
  98. Mahfuz, H., Hasan, M., Rangari, V., and Jeelani, S., "Investigation of thermal and mechanical response of Nylon-6 filaments with the infusion of acicular and spherical nanoparticles," NSTI-Nanotech 2005, Anaheim, May 8-12, 2005, Vol. 2. pp. 86.
  99. Mahfuz, H., Zainuddin, S., Rangari, V., Jeelani, S., Parker, M.A. and Al-Saadi, T, "Imrovements in High Specific Strength Epoxy-Based Composites using High Magnetic Fields," NSTI-Nanotech 2005, Anaheim, May 8-12, 2005, Vol. 2. pp. 143.
  100. Mahfuz, H., Zainuddin, S., Rangari, V., Jeelani, S., Parker, M.A. and Al-Saadi, T., "Infusion of Carbon Nanotubes and Carbon Nanofibers into SC-15 Epoxy; An investigation of the influence of High Magnetic Fields,” SAMPE 2005, May 3-6, 2005, Long Beach, CA, presented at the conference and published in the CD proceedings.
  101. Mahfuz, H., "Experimental Approaches in Nanocomposites," presented at the 3rd International Conference on Structural Stability and Dynamics (ICSSD), June 19-22, 2005.
  102. Mahfuz, H., Zainuddin, S., Uddin, F., Rangari, V., Jeelani, S., Parker, M. and Saadi, T., "Response of Magnetically Flocculated Nanophased Composites under Dynamic Loading," presented at the 3rd International Conference on Structural Stability and Dynamics (ICSSD), June 19-22, 2005.
  103. Theotokoglo, E.E., Carlsson, L.A., Vrettos, C.D. and Mahfuz, H., "Numerical Study of Fractured Sandwich Composites under Flexural Loading," Sandwich Structures 7: Advancing with Sandwich Structures and Materials, Vol. 1, pp. 423-431, 7th International Conference on Sandwich Structures (ICSS-7), 29-31 August 2005, Aalborg, Denmark.
  104. Mahfuz, H., Clements, F., and Stewart, J., "Development of Stab Resistant Body Armor using Fumed SiO2 Nanoparticles Dispersed into Polyethylene Glycol (PEG) through Sonic Cavitation," NSTI-Nanotech 2006, Boston, MA, May 7-11, 2006, Vol. 1 pp. 358.
  105. Mahfuz, H., Clements, F. and Justin, S., "Functionalization of Silica Nanoparticles to Improve Stab Resistance of Kevlar Fabrics," SES 2006, University Park, PA, August 13-16, 2006.
  106. Clements, F., Mahfuz, H. and Wetzel, E., "M50V50A50 Method for Characterizing Stab Resistant Materials for Body Armor Applications," SEM 2007, Springfield, Massachusetts, June 3-6, 2007, Paper presented and published in the CD proceeding.
  107. Clements, F. and Mahfuz, H., "Enhancing the Stab Resistance of Flexible Body Armor using Functionalized SiO2 Nanoparticles," 16th Intl. Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 8-13, 2007, Paper presented and published in the CD Proceeding..
  108. Rodgers, R., Mahfuz, H., Rangari, V., Jeelani, S., Carlsson, L, "Tensile Response of SiC-Nanoparticles Reinforced Epoxy Composites at Room and Elevated Temperatures," 16th Intl. Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 8-13, 2007, Paper presented and published in the CD Proceeding..
  109. Mahfuz, H. and Lambert, V., "Development of Stab Resistant Body Armor Using Silated SiO2 Nanoparticles Dispersed into Glutaraldehyde," NSTI-Nanotech 2008, Boston, MA, May 4-7, 2008, presented and published in the CD proceedings.
  110. Mahfuz, H. and Stewart, J., "SiC-Nanoparticles Reinforced Polyurethane Foam – Studies of Mechanical and Fracture Behavior," SEM XI International Congress & Exposition on Experimental & Applied Mechanics, June 2-5, 2008, Orlando, Florida, presented at the conference.
  111. Ma, S., and Mahfuz, H., "Investigation of Composite Surface Effect Ship (SES) Hull structure under hydrodynamic Loading using Fluid-Structure Interaction", SAMPE Fall Technical Conference, September 8-11, 2008, Memphis, TN, presented and published in the conference proceeding.
  112. Khan, M, Mahfuz, H., and Leventouri, T., "Investigation of Infusion of Ultra High Molecular Weight Polyethylene (UHMWPE) and Carbon Nanotube (CNT) into Low Density Polyethylene (LDPE) Filaments", SAMPE Fall Technical Conference, September 8-11, 2008, Memphis, TN, presented and published in the conference proceeding.
  113. Mahfuz, H., Stewart, J. and Carlsson, F., "Enhancement of Mechanical and Fracture Properties of Core Materials and Sandwich Composites using Functionalized SiC Nanoparticles," ASME International Mechanical Engineering Congress and Exposition, October 31 – November 6, 2008, Boston, Massachusetts, Presented at the Conference.
  114. Mahfuz, H., Lambert, V. and Bordner, P., "Improving Stab Resistance of Flexible Body Armor using Silane Coupling Agent and Cross-Linking Fixatives with Silica Nanoparticles," ASME International Mechanical Engineering Congress and Exposition, October 31 – November 6, 2008, Boston, Massachusetts, Presented at the Conference.
  115. Mahfuz, H. and Khan, M., "Synthesis and Characterization of Low Density Polyethylene (LDPE) Reinforced with Functionalized CNTs," ASME International Mechanical Engineering Congress and Exposition, October 31 – November 6, 2008, Boston, Massachusetts, Presented and published in the Conference Proceedings.
  116. Asseff, N.S. and Mahfuz, H., "Design and Finite Element Analysis of an Ocean Current Turbine Blade," OCEANS ’09, October 26-29, 2009, Biloxi, Mississippi, Presented and published in the conference proceedings.
  117. Ma, S. and Mahfuz, H., "The Global and Sub-Model Analysis of Composite Multi-Hull Structure using Fluid Structure Interaction," The 24th Annual American Society for Composites (ASC) Conference, University of Delaware, Newark, Delaware, September 15-17, 2009, Presented and published in the conference proceedings.
  118. Malkina, O., Mahfuz, H. and Sorge, K., "Epoxy-Based Composites with Magnetite Nanoparticles under External Uniform High Magnetic Field," ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2009, Lake Buena Vista, Florida, Presented at the conference.
  119. Khan, M. and Mahfuz, H., "Enhancing Strain Hardening Behavior of Ultra High Molecular Weight Polyethylene (UHMWPE) with CNT Reinforcement," ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2009, Lake Buena Vista, Florida, Presented at the conference.
  120. Mahfuz, H. and Ma, S., "Finite Element Simulation of Composite Ship Structures with Fluid Structure Interaction," International Simulation Multi-Conference (ISMC 2010), Ottawa, Canada, 12-14 July 2010, published in the CD proceedings.
  121. Mahfuz, H., Das, D. and Granata, R., "Reinforcement of Syntactic Foam with SiC Nanoparticles," SAMPE 2010, Seattle, Washington, 17-20 May, 2010, presented and published in the CD proceedings.
  122. Mahfuz, H., Powell, F., Granata, R. and Hosur, M., "Treatment of Carbon Fibers with POSS and Enhancement in Mechanical Properties of Composites," SAMPE 2010, Seattle, Washington, 17-20 May, 2010, presented and published in the CD proceedings.
  123. Mahfuz, H., Powell, F., Granata, R. and Hosur, M., "The Effects of POSS on the Interlaminar Shear Strength of Marine Composites under Various Environmental Conditions," NSTI-Nanotech 2010, June 21-25, 2010, Anaheim, CA, presented and published in the conference proceedings.
  124. Mahfuz, H., Das, D. and Granata, R., "Enhancing Strength, Modulus and Fracture Toughness of Syntactic Foam through Nanoparticle Reinforcement," NSTI-Nanotech 2010, June 21-25, 2010, Anaheim, CA, presented in the conference.
  125. Mahfuz, H. and Ma, S., "Investigation of Composite Ship Structures under Hydrodynamic and Blast Loads using Fluid Structure Interactions," 13th Asian Congress of Fluid Mechanics (ACFM -13), December 17-21, 2010, Dhaka, Bangladesh, published in the conference proceedings.
  126. Mahfuz, H. and Akram, M.W., "Life Prediction of Composite Turbine Blades under Random Ocean Current and Velocity Shear," OCEANS’11 Conference, June 6-9, 2011, Santander, Spain, Presented and published in the conference proceedings.
  127. Ma, S. and Mahfuz, H., "Numerical Simulation of Composites Ship Hull under Hydrodynamic and Blast Loads using Fluid Structure Interactions", 11th International Conference on Fast Sea Transportation (FAST-2011), September 26-29, 2011, Honolulu, Hawaii, Presented and published in the conference proceeding.
  128. Mahfuz, H., Powell, F., Granata, R, and Hosur, M., "Enhancing Mechanical and Hygrothermal Properties of Carbon/Vinyl Ester Composites using POSS," ASME International Mechanical Engineering Congress and Exposition, November 11– 17, 2011, Denver, Colorado, Presented at the Conference, abstract published.
  129. Mahfuz, H. and Akram, M.W., "Modeling of Composite Ocean Current Turbine Blades under Fatigue Loading," ASME International Mechanical Engineering Congress and Exposition, November 11– 17, 2011, Denver, Colorado, Presented at the Conference, abstract published.
  130. Malkina, O., Mahfuz, H., Sorge, K., Randinone, A.J., Chen, J. and Rangari, V.K., "SC-15 Epoxy Reinforced with Magnetic Nanofillers under Uniform Magnetic Field – An Investigation of Anisotropic Physical Properties," NSTI-Nanotech 2012, June 18-12, 2012, Santa Clara, CA, presented and published in the conference proceedings.
  131. Zhou, F. and Mahfuz, H., "Fatigue Analysis of Composite Turbine Blades under Random Ocean Current," OCEANS’ 12, Hampton Roads, Virginia, October 14-19, 2012, presented and published in the conference proceedings.
  132. Zhou, F. and Mahfuz, H., "Design and Analysis of Composite Ocean Current Turbine Blades using NREL Codes," ASME International Mechanical Engineering Congress and Exposition, November 09 - 15, 2012, Houston, Texas, Presented and published in the conference proceedings.
  133. Rahman, M.H., Ma, S., and Mahfuz, H., "Finite Element Simulation of Composite Ship Structures under Extreme Wave and Slamming Loads," 2013 International Conference on Grand Challenges in Modeling and Simulation (GCMS-2013), July 7-10, 2013, Toronto, Canada, Presented and published in the conference proceedings.
  134. Sabet, M., Mahfuz, H., and Hashemi, J., "Effect of Dispersion Conditions on the Thermo-Mechanical Properties of Functionalized Carbon Nanotube Reinforced Vinyl Ester," Nanotech – Advanced Materials and Applications, June 15 – 18, 2014, Washington, D.C.
  135. Sabet, M., Mahfuz, H., and Hashemi, J., "Investigation of Carbon Nanotube Dispersion in Vinyl Ester Resin using Mechanical, Thermal and Statistical Techniques," ASME International Mechanical Engineering Congress and Exposition, November 14 – 20, 2014, Montreal, Canada, presented and published in the conference proceedings.
  136. Mahfuz, H., Canino, M, and Suzuki, T., "Design and Fatigue Analysis of Composite Turbine Blades under Ocean Wave and Current Loading," 20th Intl. Conference on Composite Materials (ICCM-16), Copenhagen, Denmark, July 19-24, 2015, Presented and published at the conference proceedings.
  137. Suzuki, T., Mahfuz, H., and Canino, M., "Fatigue Load and Life Estimation of Composite Turbine Blades under Random Ocean Current," MTS/IEEE Oceans’15 Conference, October 19-22, 2015, Washington D.C., Presented and published at the conference proceedings.
  138. Sabet, S.M., H. Mahfuz, Terentis, A.C., Hashemi, J., "A new approach to the synthesis of carbon nanotube-polyhedral oligomeric silsesquioxane (POSS) nanohybrids", ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2015, Houston, Texas, Presented and published in the conference proceedings.
  139. Frame, J., Mahfuz, H., Roy, T., Carlsson, L., and Rangari, V., "Investigation of Structure-Property Relationship in Organic Matrix Nanocomposites for High Temperature Application," USACA 40th Annual Conference on Composites, Materials, and Structures, Cocoa Beach, FL 32920, January 25-28, 2016, Presented and published in the conference proceedings.
  140. Suzuki, T. and Mahfuz, H., "Non-linear Modeling of Ocean Current Turbine Blades under Large Deflection," ASME International Mechanical Engineering Congress and Exposition, November 13-16, 2016, Phoenix, Arizona, Presented and published in the conference proceedings.

Journal Publications

  1. Case, R.O. and Mahfuz, H., "Photoelastic Analysis of a Thin-Walled Compressor Housing", Experimental Mechanics, Vol. 28, No. 1, March 1988, pp. 98-104.
  2. Case, R.O. and Mahfuz, H., "Bolt Analysis by Combined Use of the Reflective and Transmission Polariscope", Experimental Techniques, May 1988, pp. 28-31.
  3. Mahfuz, H., Case, R.O. and Wong, Tin-Lup, "Mesh Generation within an Arbitrary Digitized Boundary for Solution of Elliptic Boundary Value Problems by Finite Difference Method", Computers in Engineering, Vol. 2, 1989, pp. 181-185.
  4. Mahfuz, H., Case, R.O. and Wong, Tin-Lup, "Hybrid Stress Analysis by Digitized Photoelastic Data and Numerical Methods", Experimental Mechanics, Vol. 30, No. 2, June 1990, pp. 190-194.
  5. Mahfuz, H., Case, R.O. and Wong, Tin-Lup, "Separation of the Principal Stresses by SOR Technique Over Arbitrary Boundaries", Experimental Mechanics, Vol. 30, No. 4, December 1990, pp. 319-326.
  6. Mahfuz, H., Wong, Tin-Lup and Case, R.O., "Photoelastic Data Acquisition by Digitizing Technique Over Arbitrary Boundaries", Experimental Techniques, May 1992, pp. 39-42.
  7. Mahfuz, H., Yu T. and Jeelani, S., "High Cycle Fatigue Characterization of Titanium 5Al-2.5Sn Alloy," Journal of Material Science, 28 (1993), 138-144.
  8. Salekeen, S., Haque, A., Copes, J.S., Mahfuz, H. and Jeelani, S., "Effect of Reinforcement Geometry on the Mechanical Properties of SiC/A1203 Composites and Prediction of Flexural Properties by Energy Method," Composites Engineering, Vol. 2, No. 4, pp. 239-247, 1992.
  9. Mahfuz, H., Ingram, C.I. and Jeelani, S., "Compressive Response of Thermoplastic Composites by Layered Shell Elements", Computers in Engineering, Vol. 2, 1992, pp. 95-101.
  10. Mahfuz, H., Partha, S.D., Jeelani, S., Baker, D.M. and Johnson, S., "Failure Mechanisms in Mission Cycled Carbon/Carbon Composites under Flexural Load at Room and Elevated Temperatures", Journal of Material Science, 28 (1993) 5880- 5886.
  11. Mahfuz, H., Partha, S.D., Jeelani, S., Baker, D.M. and Johnson, S., "Effect of Mission Cycling on the Fatigue Performance of SiC Coated Carbon-Carbon Composites", International Journal of Fatigue, Vol. 15, No. 4 (1993), pp. 283-291.
  12. Mahfuz, H., Partha, S.D., Xue, D., Krishnagopalan, J. and Jeelani, S., "A Combined Experimental and Finite Element Study to Predict the Failure Mechanisms in SiC Coated Carbon/Carbon Composites at Room and Elevated Temperatures Under Flexural Loading", Journal of Reinforced Plastics and Composites, Vol. 12, No. 7, July 1993, pp. 825-842.
  13. Mahfuz, H., Xue, D., Jeelani, S., Baker, D.M. and Johnson, S., "Response of SiC Coated Carbon-Carbon Composites at Room and Elevated Temperatures under Tensile Loading", Composite Science and Technology, 50 (1994) 411-422.
  14. Haque, A., Mahfuz, H., Ingram, C. and Jeelani, S., "Response of Thermoplastic and Thermosetting Composites under Compressive Loading- An Experimental and Finite Element Study", Composites Engineering, Vol. 4, No. 6, 1994, pp. 637-651.
  15. Mahfuz, H., Zadoo, D., Wilks, F., Maniruzzarman, M. and Jeelani, S., "Fracture and Flexural Characterization of SiCW/SiC Composites at Room and Elevated Temperatures", Journal of Materials Science, 1995, Vol. 30, pp. 2406-2411.
  16. Vaidya, U.K., Mahfuz, H. and S. Jeelani, "NDE of Structural and Functional Carbon- Carbon Composites after First Carbonization", Journal of Advanced Materials, Vol. 26, No. 2, pp. 41-47, 1995.
  17. Mahfuz, H., Maniruzzaman, M., Vaidya, U., and Jeelani, S., "Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon Composites", Theoretical and Applied Fracture Mechanics, 24 (1995), 21-31.
  18. Mahfuz, H., Haque, A., Yu, D. and Jeelani, S., "Response of Resin Transfer Molded (RTM) Composites Under Reversed Cyclic Loading", Transaction of the ASME, Journal of Engineering Materials and Technology, Vol. 118, pp. 49-57, 1996.
  19. Vaidya, U.,Mahfuz, H. and Jeelani, S., "Nondestructive Characterization/Evaluation of Functional Sandwich and Hybrid Carbon-Carbon Composites", Journal of Reinforced Plastics and Composites, Vol. 15, October 1996, pp. 988- 1010.
  20. Vaidya, U., Dadzie, P., Haque, A., Mahfuz, H. and Jeelani, S., "NDE and Characterization of Microfibers Modified Textile Carbon/Phenolic and Carbon/Carbon Composites, Journal of Reinforced Plastics and Composites", Vol. 16, No. 11, 1997, pp. 968-1001.
  21. Mahfuz, H., Maniruzzaman, M., Vaidya, U. and Jeelani, S., "Response of SiCf /Si3N4 Composites Under Cyclic Loading - An Experimental and Statistical Analysis," Transaction of the ASME, Journal of Engineering Materials and Technology, Vol. 119, pp 186-193, April 1997.
  22. Mahfuz, H., Saha, M., Biggs, R. and Jeelani, S., "Damage Tolerance of Resin Infiltrated Composites After Low Velocity Impact - Experimental and Numerical Studies," Key Engineering Materials, Trans. Tech Publications, Switzerland, Vol. 141-143 (1998), pp. 209-234.
  23. Mahfuz, H., Mian, A.K.M., Vaidya, U., Brown, T. and Jeelani, S., "Finite Element Study of the Fiber-Matrix Interface Behavior of [0/90] Laminated Composites Under Tensile Loading," Journal of Materials Science, 33 (1998) 2965-2973.
  24. Vaidya, U.K., Kamath, M.V., Mahfuz, H. and Jeelani, S., "Low Velocity Impact Response of Resin Infusion molded foam Filled Honeycomb Sandwich Composites," Journal of Reinforced Plastics and Composites, Vol. 17, No. 9/1998, pp. 819-849.
  25. Haque, A., Rahman, M., Vaidya, U., Mahfuz, H. and Jeelani, S., "Tensile Behavior of Woven Ceramic Matrix Composites at Room and Elevated Temperature: An Experimental and Numerical Study," Key Engineering Materials, Vols. 164-165 (1999) pp. 341-344.
  26. Gama, B., Bogetti, T., Fink, B., Mahfuz, H., and Gillespie, J., “Modeling and Simulation of the Dynamic Behavior of EPDM Rubber under Stress Wave Loading,” Physics and Modern Topics in Mechanical and Electrical Engineering (ISBN: 960-8052-10-6), World Scientific and Engineering Society Press, pp. 137-144, 1999.
  27. Mahfuz, H., Zhu, Y, Haque, A., Vaidya, U, Jeelani, S, "Investigation of High Velocity Impact on Integral Armor Using Finite Element Method," International Journal of Impact Engineering, Vol. 24, No. 2 (2000), pp. 203-217.
  28. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. and Jeelani, S., "Stress Wave Propagation through Fiber and Matrix in a Cylindrical Composite Coupon," Physics and Modern Topics in Mechanical and Electrical Engineering (ISBN: 960-8052-10-6), World Scientific and Engineering Society Press, pp. 151-158, 1999.
  29. Mahfuz, H., Mamun, W., and Jeelani, S., "Effect of Core Density and Implanted Delamination in the High Strain Rate Response of Foam Core Sandwich Composites," Sandwich Construction 5, Volume 2, pp. 597-606, 2000.
  30. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. and Jeelani, S., "An Innovative Technique for Measuring the High Strain Rate Response of Sandwich Composites," Composite Structures, 50 (2000) 279-285.
  31. Mahfuz, H., Zaman K., Hisham, M., Foy, Costee, Haque, A. and Jeelani, "Fatigue Life Prediction of Thick-Section S2-Glass/Vinyl-Ester Composites under Flexural Loading," Transaction of ASME, Journal of Engineering Materials and Technology, Vol. 122, October 2000, pp. 402-408.
  32. Motuku, M., Janowski, G.M., Vaidya, U, Mahfuz, H and Jeelani, S., "Damage Evolution in Low-Velocity Impacted Unreinforced Vinyl Ester 411-350 and 411-C50 Resin Systems," Polymer Composites, No. 6, Vol. 21, December 2000, pp.878-899.
  33. Gama, B.A., Gillespie, J.W., Mahfuz, H., Bogetti, and Fink, B.K., “Effect of Non-Linear Material Behavior on the Through-Thickness Stress Wave Propagation in Multi-Layer Hybrid Lightweight Armor,” Advances in Computational Engineering & Sciences, Volume 1, pp. 157, 2000.
  34. Mahfuz, H., Mamun, W., Austin, L., Haque, A and Jeelani, S., "New Formulations for Hopkinson Bar Technique to Extract a Response of the Constituent Material in Composite Specimens," Journal of Materials: Design and Applications, Vol. 215, pp. 15-27, 2001.
  35. Mahfuz, H., Mamun, W. and Jeelani, S., "High Strain Rate Response of Sandwich Composites; Effect of Core Density and Core-Skin Debond," Journal of Advanced Materials, Vol. 34, No. 1, January 2002, pp. 22-26.
  36. Motuku, M, Janowski, G.M., Vaidya, U.K. Mahfuz, H. and Jeelani, S.,"Low Velocity Impact Characterization of Unreinforced Vinyl Ester 411-350 and 411-C50 Resin Systems," Polymer & Polymer Composites, Vol. 7, No. 6, 1999, pp. 383-407.
  37. U.K. Vaidya, M.V. Kamath, M.V. Hosur, Mahfuz, H. and S. Jeelani, "Manufacturing and Low Velocity Impact Response of Sandwich Composites With Hollow And Foam Filled Z-Pin Reinforced Core," Journal of Composites Technology and Research, JCTRER, Vol. 21, No.2, April 1999, pp. 84-97.
  38. Gama, B., Gillespie, J., Mahfuz, H., Bogetti, T., Fink, B and Jeelani, S.,"High Strain Rate Behavior of Plain-Weave S-2 Glass/Vinylester Composites," Journal of Composite Materials, Vol. 35, No. 13 (2001), pp. 1201-1228.
  39. Mahfuz, H., Gama, B., Das, P., Jeelani, S., Gillespie, J., and Fink, B., "Response of S2-Glass/Vinyl Ester Composites under High Strain Rate Loading - An Experimental and Finite Element Study," Journal of Advanced Materials, Vol. 35, No. 4 (2003) pp. 36-43.
  40. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S.,"Dynamic Mechanical Analysis and Flexural Fatigue of PVC Foams," Composite Structures, 58 (2002) 175-183.
  41. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S.,"Dynamic Compression of Cellular Cores: Temperature and Strain Rate Effects," Composite Structures, 58 (2002) 505-512.
  42. Kulkarni, N., Mahfuz, H., Jeelani, S. and Carlsson, L."Fatigue Crack Growth and Life Prediction of Foam Core Sandwich Composites under Flexural Loading," Composite Structures 59 (2003) 499-505.
  43. Chakravarty, U., Mahfuz, H., Saha, M. and Jeelani, S.,”Strain Rate Effects on Sandwich Core Materials: An Experimental and Analytical Investigation,” Acta Materialia, 51 (2003) 1469-1479.
  44. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S., “Fatigue of Cross-linked and Linear PVC Foams under Shear Loading,” Journal of Reinforced Plastics and Composites, Vol. 23, No. 6, pp. 601-612, 2004.
  45. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S., ”High Strain Rate Response of Cross-linked & Linear PVC Foams,” Journal of Reinforced Plastics and Composites, Vol. 23, No. 7, pp. 739-749, 2004.
  46. Kulkarni, N., Mahfuz, H. and Jeelani, S.,"Fatigue Failure Mechanism and Crack Growth in Foam Core Sandwich Composites under Flexural Loading," Journal of Reinforced Plastics and Composites, Volume 23, No. 1, pp. 83-94, 2004.
  47. Majumdar, P., Srinivasagupta, D., Mahfuz, H., Joseph, B., “Effect of Processing Conditions and Material Properties on the Debond Fracture Toughness of Foam-Core Sandwich Composites: Experimental Optimization,” Composites Part A: Applied Science and Manufacturing, 34 (2003) 1097-1104.
  48. Srinivasagupta, D., Joseph, B., Majumdar, P., Mahfuz, H., Thomas, M., Christensen, S., “Effect of Processing Conditions and Material Properties on the Debond Fracture Toughness of Foam-Core Sandwich Composites: Process Model Development,” Composites Part A: Applied Science and Manufacturing, 34 (2003) 1085-1095.
  49. Saha, M., Mahfuz, H., S. Jeelani, Joarder, C., Srinivasgupta, D., Joseph, B., Thomas, M., and Christensen, S.,”Manufacturing and Tensile Characteristics of Integral Sandwich Tee Joints,” Journal of Advanced Materials, Vol. 37, No. 1, 2005, pp. 53-60.
  50. Thomas, T., Mahfuz, H., Kanny, K., and Jeelani, S.,”Dynamic Compression of Sandwich Composites at sub-ambient Temperatures,” Journal of Composite Materials, Vol. 38, No. 8, pp. 641-654, 2004.
  51. Kanny, K.,, Mahfuz, H., Thomas, T., and Jeelani, S, “Static and Dynamic Characterization of Polymer Foams under Shear Loads," Journal of Composite Materials, Vol. 38, No. 8, pp. 629-640, 2004.
  52. Mahfuz, H., Rangari, V., Islam, M., and Jeelani, S., ”Fabrication, Synthesis and Mechanical Characterization of Nanoparticles Infused Polyurethane Foams,” Composites Part A: Applied Science and Manufacturing, Vol. 35, No. 4, pp. 453-460, 2004.
  53. Mahfuz, H., Islam, M., Rangari, V., Saha, M. and Jeelani, S., “Response of Sandwich Composites with Nanophased Cores under Flexural Loading,” Composites Part B: 35 (2004) 543-550.
  54. Chisholm, N., Mahfuz, H., Rangari, V., Ashfaq, A. and Jeelani, S., “Fabrication and Mechanical Characterization of Carbon/Epoxy Nanocomposites,” Composite Structures 67 (2005) 115-124.
  55. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, ”Carbon Nanoparticles/Whiskers Reinforced Composites and their Tensile Response,” Composites Part A: Applied Science and Manufacturing, Vol. 35 (2004) 519-527.
  56. Mahfuz, H., Majumdar, P., Saha, M. and Jeelani, S., “Integral Manufacturing of Composite Skin-Stringer Assembly and their Stability Analyses,” Applied Composite Materials, 11 (3): 155-171, 2004.
  57. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, ”Manufacturing and Characterization of Carbon Nanotube/Polyethylene Composites,” International Journal of Nanoscience, Vol. 4, No. 1 (2005) 1-18.
  58. Zhou, Y., Mahfuz, H., and Jeelani, S., ”Numerical Simulation for High Strain Rate Failure Process of Unidirectional SiCf/Al Composites,” International Journal of Damage Mechanics, Vol. 14 (4), 321-341 (2005).
  59. Mahfuz, H., Islam, S., Saha, M., Carlsson, L., and Jeelani, S., “Buckling of Sandwich Composites; Effects of Core-Skin Debonding and Core Density,” Applied Composite Materials (2005) 12: 73-91.
  60. Rodgers, R., Mahfuz, H., Rangari, V., Chisholm, N., and Jeelani, S., ”Infusion of Nanoparticle into SC-15 Epoxy; an Investigation of Thermal and Mechanical Response,” Macromolecular Materials & Engineering, 2005, 290, 423-429.
  61. Mahfuz, H., Uddin, M.F., Rangari, V.K., Saha, M.C., Zainuddin, S. and Jeelani, S., “High Strain Rate Response of Sandwich Composites with Nanophased Cores,” Applied Composite Materials, (2005) 12: 193-211.
  62. Mahfuz, H., Baseer, M.A., Rangari, V.K. and Jeelani, S., “Fabrication, Characterization and Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE Journal, Vol. 41, No. 2, pp. 40-48, 2005.
  63. Zhou, Y., Rangari, V., Mahfuz, H., Jeelani, S. and Mallick, P.K., “Experimental Study on Thermal and Mechanical Behavior of Polypropylene, Talc-filled Polypropylene and Polypropylene Nanocomposites,” Materials Science and Engineering: A 402 (2005) 109-117.
  64. Kanny, K., Mahfuz, H., Thomas, T., and Jeelani, S., “Temperature Effects on the Fatigue Behavior of Foam Core Sandwich Structures,” Polymer and Polymer Composites, V 12, n 7, 2004, pp. 551-559.
  65. Saha, M., Mahfuz, H., Chakravarty, U., and Jeelani, S., “Effect of Density, Microstructure, and Strain Rate on Compression Behavior of Polymer Foams,” Journal of Materials Science and Engineering A 406 (2005) 328-336.
  66. Kanny, K., Mahfuz, H., “Flexural Fatigue Characteristics of Sandwich Structures at Different Loading Frequencies,” Composite Structures 67 (2005) 403-410.
  67. Salekeen, S., Nana, J., Mahfuz, H. and Jeelani, S., “Mechanical Property Degradation of a Nicalon Fiber Reinforced Ceramic matrix Composite under Thermal Shock Loading,” Accepted for publication, Composite Structures, September 2005.
  68. Mahfuz, H., Adnan, A., Rangari, V.K., Hasan, M.M., Jeelani, S., Wright, W.J. and DeTeresa, S.J., “Enhancement of Strength and Stiffness of Nylon 6 Filaments through Carbon Nanotubes Reinforcements,” Applied Physics Letters, 88, 083119 (2006).
  69. Mahfuz, H., Thomas, T., Rangari, V. And Jeelani, S., “On the Dynamic Response of Sandwich Composites and their Core Materials,” Composites Science and Technology, 66 (2006) 2465-2472.
  70. Zhou, Y., Baseer, M., Mahfuz, H., and Jeelani, S., “Monte Carlo Simulation on Tensile Failure Process of Unidirectional Carbon Fiber Reinforced Nanophased Epoxy,” Materials Science and Engineering A, Vol. 420, issues 1-2, 2006, pp. 63-71.
  71. Zhou, Y., Baseer, M., Mahfuz, H., and Jeelani, S., “Statistical Analysis on the Fatigue Strength Distribution of T700 Carbon Fiber,” Composite Science and Technology, Vol. 66 No. 13, 2006, pp. 2100-2106.
  72. Hasan, M., Zhou, Y., Mahfuz, H. and Jeelani, S., “Effect of SiO2 Nanoparticle on Thermal and Tensile Behavior of Nylon-6,” Materials Science and Engineering: A, Vol. 429, Issues 1-2, 2006, pp. 181-188.
  73. Rangari, V., Hassan, T., Zhou, Y., Mahfuz, H., Jeelani, and Prorok, B., “Cloisite Clay-Infused Phenolic Foam Nanocomposites,” Journal of Applied Polymer Science, Vol. 103, 308-314 (2007).
  74. Mahfuz, H., Zainuddin, S., Parker, M., Sadi, T., Rangari, V., and Jeelani, S., ”Enhancement of Strength and Stiffness of Epoxy-Based Composites using Nanoparticle Infusion and High Magnetic Fields,” Materials Letter 61 (2007) 2535-2539.
  75. Mahfuz, H., Hasan, M., Rangari, V., and Jeelani, S. ”Reinforcement of Nylon 6 Filaments with SiO2 Nanoparticles and Comparison of Young’s Modulus with Theoretical Bounds,” Macromolecular Materials & Engineering 2007, 292, 437-444.
  76. Ayorinde, E., Gibson, R., Kulkarni, S., Deng, F., Mahfuz, H., Islam, S., Jeelani, S.,”Reliable low-cost NDE of Composite Marine Sandwich Structures,” Composites: Part B, 39 (2008) 226-241.
  77. Adnan, A., Sun, C.T., and Mahfuz, H., “A molecular Dynamics Simulation Study to Investigate the Effect of Filler Size on Elastic Properties of Polymer Nanocomposites,” Composites Science and Technology 67 (2007) 348-356.
  78. Theotokoglou, E.E., Hortis. D., Carlsson, L.A. and Mahfuz, H., “Numerical Study of Fractured Sandwich Composites under Flexural Loading,” Journal of Sandwich Structures and Materials 2008; 10; 75.
  79. Mahfuz, H., Hasan, M., Dhanak, V., Beamson, G., Stewart, J., Rangari, V., Wei, X., Khabashesku, V. and Jeelani, S., “Reinforcement of Nylon 6 with Functionalized Silica Nanoparticles for Enhanced Tensile Strength and Modulus, Nanotechnology,” 19 (2008) 445702 (7pp).
  80. Mahfuz, H., Zainuddin, S., Parker, M.R., Al-Saadi, T., Rangari, V.K. and Jeelani, S., “Reinforcement of SC-15 Epoxy with CNT/CNF under High Magnetic Field – An Investigation of Mechanical and Thermal Response,” Journal of Materials Science, DOI: 10.1007/s10853-008-3161-5, 2008.
  81. Mahfuz, H., Clements, F., Rangari, V., Dhanak, V. and Beamson, G., “Enhanced Stab Resistance with Functionalized Silica Nanoparticles,” Journal of Applied Physics 105, 064307 (2009).
  82. Rangari, V., Shaik, M.Y., Mahfuz, H., and Jeelani, S., “Fabrication and Characterization of High Strength Nylo-6/Si3N4 Polymer Nanocomposites Fibers,” Materials Science and Engineering A 500 (2009) 92-97.
  83. Uddin, M.F., Mahfuz, H., Zainuddin, S. and Jeelani, S., “Improving Ballistic Performance of Polyurethane Foam by Nanoparticle Reinforcement,” Journal of Nanotechnology, Volume 2009, Article ID 794740, 8 pages, DOI: 10.1155/2009/794740.
  84. Stewart, J., Mahfuz, H., and Carlsson, L., “Enhancing Mechanical and Fracture Properties of Sandwich Composites using Nanoparticle Reinforcement,” Journal of Materials Science (2010) 45:3490-3496, DOI: 10.1007/s 10853-010-4380-0.
  85. Zainuddin, S., Mahfuz, H., and Jeelani, S., “Enhancing Fatigue Performance of Sandwich Composites with Nanophased Core,” Journal of Nanomaterials, Volume 2010, Article ID 712731, 8 pages, DOI: 10.1155/2010/712731.
  86. Khan, M.R., Mahfuz, H., Leventouri, Th., Rangari, V.K. and Kyriacou, A., “Enhancing Toughness of LDPE Filaments through Infusion of MWCNTs and UHMWPE,” Polymer Engineering Science, 2010, DOI 10.1002/pen.21873.
  87. Kumar, D.D., Thomas, P.V., and Mahfuz, H., “An Overview of Carbon Nanotubes,” Journal of Materials Education, Vol. 32 (3-4): 153-162, 2010.
  88. Malkina, O., Mahfuz, H., Sorge, K.D., and Rangari, V.K., “Anisotropic Physical Properties of SC-15 Epoxy Reinforced with Magnetic Nanofillers under Uniform Magnetic Field,” Journal of Materials Science, (2011), 46:3982-3988, DOI 10.1007/s10853-011-5325.
  89. Mahfuz, H., Khan, M.R. and Leventouri, Th., “Investigation of MWCNT Reinforcement on the Strain Hardening Behavior of Ultra High Molecular Weight Polyethylene (UHMWPE),” Journal of Nanotechnology (2011), DOI:10.1155/2011/637395.
  90. Mahfuz, H., Powell, F., Granata, R., Hosur, M., and Khan, M, “Coating of Carbon Fiber with Polyhedral Oligomeric Silsesquioxane (POSS) to Enhance Mechanical Properties and Durability of Carbon/Vinylester Composites,” Materials 2011, 4, 1619-1631; doi:10.3390/ma4091619.
  91. Khan, M.R., Mahfuz, H. and Leventouri, T. “Effect of Strain Hardening on the Elastic Properties and Normalized Velocity of Hybrid UHMWPE-Nylon-6-SWCNT Nanocomposites Fiber,” Journal of Materials Research, Vol. 27, No 20, 2012, pp. 2657-2667.
  92. Ma, S., and Mahfuz, H, “Finite Element Simulation of Composite Ship Structures with Fluid Structure Interaction,” Ocean Engineering 52 (2012) 52-59.
  93. Khan, M.R., Mahfuz, H., Leventouri, T., and Adnan, A., “Elastic Properties of UHMWPE-SWCNT Nanocomposites Fiber: An Experimental, Theoretical and Molecular Dynamics Evaluation,” Journal of Materials Engineering and Performance, January 2013, DOI: 10.1007/s11665-013-0471-9.
  94. Malkina, O., Mahfuz, H., Sorge, K., Rondinone, A., Chen, J., More, K., Reeves, K., Rangari, V.K., “Magnetic Alignment of SWCNTs Decorated with Fe2O3 to Enhance Mechanical Properties of SC-15 Epoxy,” AIP Advances 3, 042104 (2013).
  95. Zhou, F., Mahfuz, H., Alsenas, G.M., Hanson, H.P., “Static and Fatigue Analysis of Composite Turbine Blades under Random Ocean Current Loading,” Marine Technology Society Journal (MTSJ), March/April 2013, Vol. 47 (2), pp. 59-69.
  96. Khan, M.R., Mahfuz, H., and Adnan, A., “A study of Mechanical Behavior and Morphology of Carbon Nanotube Reinforced UHMWPE/Nylon-6 Hybrid Polymer Nanocomposites Fiber,” Fibers and Polymers, 2014, Vol. 15, No. 7, 1484-1492.
  97. Sabet, S.M., Mahfuz, H., Hashemi, J., Nezakat, M., and Szpunar, J.A., “Effects of Sonication Energy on the Dispersion of Carbon nanotubes in a Vinyl Ester matrix and Associated Thermo-Mechanical Properties,” Journal of Materials Science (2015) 50:4729-4740, DOI 10, 1007/s 10853-015-9024-y.
  98. Khan, M.R., Absar, S., Mahfuz, H., Edwards, K., ”Morphological Characteristics of Solution Spun Nanocomposite Fibers Synthesized from UHMPE, Nylon-6 and Carbon Nanotubes Compatibilized with Polyethylene-graft-Maleic Anhydride,” Polymer Science, 2015, Vol. 57, N0. 6, pp.863-873.
  99. Khanal, S.P., Mahfuz, H., Rondinone, A.J., and Leventouri, Th., “Imrovement of the Fracture Toughness of Hydroxyapatite (Hap) by Incorporation of Carboxyl Functionalized Single-Walled Carbon nanotubes (cfsWCNTs) and Nylon,” Materials Science and Engineering C 60 (2016) 204-210.
  100. Sabet, S.M., Mahfuz, H., Hashemi, J., Terentis, A.C., “A Facile Approach to the Synthesis of Multi-Walled Carbon Nanotube-Polyhedral Oligomeric Silsesquioxane (POSS) Nanohybrids,” Materials Letters 68 (2016) 9-12.
  101. Suzuki, T., Mahfuz, H., and Canino, M., “Resource Characterization and Statistical Modeling of Ocean Current at the Gulf Stream,” Marine Technology Society Journal (MTSJ), Vol. 51, No.1, 2017, pp. 52-63.
  102. Hulsey, S., Absar, S., Nahida, Q., Sabet, S., Mahfuz, H., and Khan, M, “Synthesis and Characterization of UHMWPE Nanocomposite Fibers Containing Carbon Nanotubes Coated With a PVP Surfactant Layer,” Polymer Composites, 2017, DOI 10.1002/pc.24444.

Keynote and Invited Papers/Presentations

  1. Mahfuz, H., Mian, A.K.M. A., Vaidya, U., Brown, T. and Jeelani, S., "Study of the Interface Behavior of SiCf/Si3N4 Composites Using a 3-D Unit Cell Model", 4th International Symposium on Advanced Materials (ISAM-4), Islamabad, Pakistan, Sept. 17-21, 1995, Vol. 1, pp. 667-677.
  2. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S., "High Strain Rate Compression Behavior of Matrix Materials," 5th International Symposium on Advanced Materials (ISAM - 5), Keynote Speech, Islamabad, Pakistan, 1997, Vol. 1, pp. 1-9.
  3. Mahfuz, H., “Symposium on Processing, Characterization and Modeling of High Temperature Composite Materials”, Invited Speaker, 1997 Joint ASME and ASCE Summer Meeting, Northwestern University, Evanston, Illinois, June 29 - July 2, 1997.
  4. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S., "Finite Element Modeling of the High Strain Rate Behavior of S-2 Glass/Vinyl Ester Composites Under Compressive Loading," 11th International Conference on Composite Materials (ICCM-11), Melbourne, Australia, July 1997, Volume V, pp. 819-829.
  5. Mahfuz, H., Mamun, W. and Jeelani, S.,"Recent Advances in Understanding the Response of Composite Materials at Higher Rates of Strain," Keynote Paper, 4th International Conference on Mechanical Engineering (ICME 2001), Vol. 1., pp. 57-65.
  6. Mahfuz, H., Maniruzzaman, M., Zaman, M., Kulkarni, N., and Jeelani, S.,"Response of Advanced Composites under Cyclic Loading; Recent Advances in Numerical and Experimental Approaches," Keynote Paper, BSME-ASME International Conference on Thermal Engineering, 2001, Vol. 1, pp. 120-132.
  7. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S.,"Flexural Fatigue of PVC Foams," 2001 ASME International Mechanical Engineering Congress, AMD-Vol. 248, pp. 39-49.
  8. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S.,"High Strain Rate Response of PVC Foams," 2001 ASME International Mechanical Engineering Congress, AMD-Vol. 247, pp. 93-101.
  9. Mahfuz, H., Chisholm, N. and Jeelani, S., "Quasi-Static and High Strain Rate Response of Nano-featured Carbon/Epoxy Composites," ASME Winter Annual Meeting, New Orleans, Louisiana, November 2002, presented at the conference.
  10. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S., "Effects of Temperature on the Fatigue Behavior of Foam Core Sandwich Composites," ASME Winter Annual Meeting, New Orleans, Louisiana, November 2002, presented at the conference.
  11. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S., "Effects of Elevated and Sub-ambient Temperatures on the High Strain Rate Response of Sandwich Composites," ASME Winter Annual Meeting, New Orleans, Louisiana, November 2002, presented at the conference.
  12. Mahfuz, H., Adnan, A., Rangari, V. and Jeelani, S., "Tensile response of carbon nanocomposites," 14th Intl. Conference on Composite Materials (ICCM-14), San Diego, CA, Preprints 2422, July 14-18, 2003.
  13. Mahfuz, H., Kanny, K., Thomas, T. and Jeelani, S., "The Effects of Viscoelasticity on the Fatigue Performance of Foam Core Sandwich Structures," 14th Intl. Conference on Composite Materials (ICCM-14), San Diego, CA, Preprints 2328, July 14-18, 2003.
  14. Mahfuz, H., Thomas, T., Rangari, V., Islam, M. and Jeelani, S., "On the Dynamic Response of Sandwich Composites and their Core Materials," Invited lecture on the Symposium in honor of Professor C.T. Sun at the American Society for Composites, 18th Annual Tech. Conf., Gainesville, Florida, October 19-22, 2003.
  15. Mahfuz, H., Islam, M, Rangari, V., and Jeelani, S., "Fabrication, Synthesis and Cyclic Response of Nanophased Sandwich Composites," presented at the 2003 ASME International Mechanical Engineering Congress, Washington, DC, November 15-21, 2003.
  16. Mahfuz, H., Thomas, T., Rangari, V., Islam, M. and Jeelani, S., "Dynamic Response of Sandwich Composites," Keynote Lecture, International Conference on Mechanical Engineering (ICME 2003), December 26-28, 2003, Dhaka, Bangladesh, Vol. 1, pp. 1-10.
  17. Mahfuz, H., Chisholm, N., Ashfaq, A., Rangari, V. and Jeelani, "Recent Advances in Structural Nanocomposites," Keynote Lecture, 2nd BSME-ASME International Conference, January 2-4, 2004, Dhaka, Bangladesh, Vol-1, pp. 82-101.
  18. Mahfuz, H., Uddin, M.F., Saha, M.K., Rangari, V.K., and Jeelani, S., "Response of Nanophased Core Materials and Sandwich Composites under Ballistic and High Strain Rate Loading," The 11th US-Japan Conference on Composite Materials, September 9-11, 2004, Yonezawa, Yamagata, Japan, CD Proceedings.
  19. Mahfuz, H, "Characterization of Nanophased Carbon Prepeg Laminates," presented at COMPOSITES 2004 sponsored by The American Composites Manufacturers Association (ACMA), October 6, 2004, Tampa, Florida.
  20. Mahfuz, H., "Colloquium on “Three Routes to Structural Nanocomposites," at the Department of Mechanical, Aerospace, and Nuclear Engineering of Rensselaer Polytechnic Institute (RPI) on September 24, 2004.
  21. Mahfuz, H., "View of Nanocomposites Development," Workshop of Modeling/Simulations for Large Engineering Problems, Mississippi State University, Starkville, Mississippi, October 27, 2004.
  22. Mahfuz, H., Colloquium on "Nanoparticle Infusion into Structural Polymers and the Influence of Magnetic Flocculation," at the Department of Aerospace and Astronautics, Purdue University on December 2, 2004.
  23. Mahfuz, H., Uddin, M.F., Rangari, V.K. and Jeelani, "Response of Sandwich Composites with Nanophased Cores under High Velocity Impact," presented at the 2004 ASME International Mechanical Engineering Congress, Anaheim, California, November 13-19, 2004.
  24. Mahfuz, H., Kulkarni, N., Carlsson, L., Uddin, F.K. and Jeelani, S., "Fatigue Crack Growth and Life Prediction of Foam Core Sandwich Composites under Flexural Loading," presented at the 2004 ASME International Mechanical Engineering Congress, Anaheim, California, November 13-19, 2004.
  25. Mahfuz, H., Uddin, M.F., Rangari, V.K. and Jeelani, S., "Response of Nanophased Sandwich Composites under Quasi-Static and Dynamic Loading," presented at PLASTICITY 2005, Kauai, Hawaii, January 3-9, 2005.
  26. Mahfuz, H., Adnan, A., Rangari, V.K., Hasan, M.M., Jeelani, S., Wright, W.J. and DeTeresa, S.J., "Enhancement of Strength and Stiffness of Nylon 6 Filaments through Carbon Nanotubes Reinforcements," presented at the ASME International Mechanical Engineering Congress, November 5-11, 2005.
  27. Mahfuz, H. and Jeelani, H., "Enhancement in Strength and Stiffness of Nylon-6 Filaments through Functionalized SiO2 Nanoparticles," Invited seminar at the Department of Physics, University of Liverpool, Liverpool, L69 3BX, UK, October 02, 2006.
  28. Mahfuz, H., Hasan, M., Stewart, J., Rangari, V. and Jeelani, S., "Functionalization of Nanoparticles and their Influence on Nanocomposites Properties: A Combined Experimental and Theoretical Investigation," Keynote Lecture, 3rd BSME-ASME International Conference, December 20-22, 2006, Dhaka, Bangladesh. CD Proceedings, Vol-1.
  29. Mahfuz, H., Hasan, M., Stewart, J., Rangari, V., and Jeelani, S., "Functionalized Nanoparticles and their Influence on the Properties of Nylon Filaments," 16th Intl. Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 8-13, 2007, Presented and published at the conference proceedings.
  30. Mahfuz, H., "Nanostructured Materials and their Promises for Future Structural Applications," Keynote lecture at the Microscopy and Microanalysis 2007 Conference (M&M 2007), August 4-9, Ft. Lauderdale, Florida.
  31. Mahfuz, H., Stuart, J., "Enhancement of Mechanical and Fracture Properties of Polyurethane Foam Reinforced with Functionalized SiC Nanoparticles," Experimental Techniques and Design in Composite Materials (ETDCM 8), Sardinia, Italy, 3-6 October, 2007.
  32. Mahfuz, H., Hasan, M., Stewart, J., Rangari, V. and Jeelani, S., "Enhancement of Strength and Stiffness of Nylon 6 Filaments with Functionalized Silica Nanoparticles,” Experimental Techniques and Design in Composite Materials (ETDCM 8), Sardinia, Italy, 3-6 October, 2007.
  33. Mahfuz, H., Khan, M and Leventouri, T., "Reinforcement Of Low Density Polyethylene (LDPE) With CNT And Ultra High Molecular Weight Polyethylene (UHMWPE)- A Systematic Approach To Enhance Strength, Modulus And Toughness," 13th US-Japan Conference on Composite Materials, June 6-7, 2008, Tokyo, Japan, presented, and published in the CD Proceedings.
  34. Mahfuz, H., "Enhancing Stab Resistance of Flexible Body Armor Using a Fixative Cross-Linker," Colloquium at the Department of Aeronautics and Astronautics, Purdue University, June 27, 2008.
  35. Mahfuz, H., Khan, M.R., Adnan, A., Hasan, M., Rangari, V.K., Dhanak, V. and Jeelani, S., "Advances in Nanoscale Reinforcement of Textile Polymers," Keynote Lecture, 4th BSME-ASME International Conference, December 27 - 29, 2008, Dhaka, Bangladesh, Conference Proceedings, Vol-1, pp. 26-35.
  36. Mahfuz, H., "Advances in Nanocomposites for Structural Applications," Keynote Lecture, International Conference on Advanced Materials for Application in Acoustics and Vibration (AMAAV), Cairo, Egypt, 4-6 January 2009, published in the CD Proceedings.
  37. Mahfuz, H., "Nanoparticle Reinforcement into Polymers for Structural Nanocomposites," Invited Lecture, Summer School – 2011, The University of Tokushima, Japan, August 03, 2011.
  38. Mahfuz, H., "Global Engineering Education – An Overview of Efforts Initiated at Florida Atlantic University," Invited Lecture, 6th International Symposium on Global Engineering Education, The University of Tokushima, Japan, August 05, 2011.
  39. Mahfuz, H., "Nanoscale Inclusion into Polymers – A New Paradigm Shift in Composite Materials," Invited Seminar, College of Engineering, Montana State University, Bozeman, Montana, September 23, 2011.
  40. Mahfuz, H., "Nanoparticle Reinforcement of Textile Polymers for Enhanced Energy Absorption," Keynote Lecture, Nanoflorida-2011, October 01, 2011, Florida International University, Miami, Florida.
  41. Mahfuz, H. and Khan, M.R., "Advances in the Development of Polymeric Fibers with High Elastic Energy Storage Capacity," Keynote Lecture, International Conference on Mechanical Engineering (ICME-2011), December 18-20, 2011, Dhaka, Bangladesh.
  42. Mahfuz, H., "Nanoparticle Reinforced Flexible Body Armor for Enhanced Spike Resistance," Keynote Lecture, Nanoflorida-2012, September 29, 2012, University of South Florida, Tampa, Florida.
  43. Mahfuz, H. and Khan, M.R., "High Energy Fibers through Nanoparticle Reinforcement in Textile Polymers," Keynote Lecture, the 3rd Global Conference on Materials Science and Engineering (CMSE 2014), October 20 – 23, 2014, Shanghai, China.
  44. Mahfuz, H., "Advances in the Design of Ocean Energy Turbines," Invited Lecture, Diving Salvage and Offshore Summit (DSOS 2014), Annual World Congress, October 16 – 19, 2014, Dalian China.
  45. Mahfuz, H., "An Overview of Collaboration between Florida Atlantic University and University of Tokushima," Invited Lecture, University of Tokushima, Japan, October 29, 2014.
  46. Mahfuz, H., "An Analysis of Composite Turbine Blades under Random Ocean Current Loading," Invited Lecture, University of Tokyo, Japan, October 30, 201

Non-Refereed Publications, and other Presentations

  1. Mahfuz, H., Xue, D. and Jeelani, S., "Response of Advanced Carbon-Carbon Composites under Tensile Loading," 3rd Pacific Rim Forum on Composite Materials, Nov. 2-4, 1993, Vol. 1, Honolulu, Hawaii.
  2. Vaidya, U., Mahfuz, H., Jeelani, S. and Motuku, M., "Low Velocity Impact response of Polymer Composites with Self-Healing Capability," Alabama Materials Research Conference, University of Alabama at Huntsville, Oct. 25-26, 1997, published in the proceedings.
  3. Krishnagopalan, J., Vaidya, U. Abraham. A., Murthy, C.R.L., Fotedar, K., Mahfuz, H. and Jeelani, S., "Manufacturing of Composite Integral armor using a Cost effective Resin Infusion Process," American Institute of Chemical Engineers Meeting, Chicago, Sept. 1997, published in the proceeding.
  4. Vaidya, U., Hosur, M., Kumar, P., Mahfuz, H., Haque and Jeelani, S., Impact Damage Resistance of Innovative Functional Sandwich Composites," Symposium on Recent Developments in the Study of Impacts on Composite Materials, ASME 1999 Mechanics and Materials Conference, Virginia Polytechnic Institute and State University, Blacksburg, VA, June 27-30, 1999, published in the proceeding.
  5. Vaidya, U. Hosur, M., Haque, A., Mahfuz, H. and Jeelani, S., "Impact Response of Innovative Sandwich Composites in Low, Intermediate Velocity and High Strain Rate Scenarios," ICCM-12, July 6-10, 1999, Paris, France, published in the proceeding.
  6. Mahfuz, H., Pal, A., Rahman, M. and Jeelani, S., "Failure Analysis of Thick Composite Rings Under Diametral Compression," 12th International Conference on Composite Materials (ICCM-12), Palais Des Congress, Paris, July 5-9, 1999, Presented and published in the proceeding.
  7. Mahfuz, H., Rahman, M., Vaidya, U., Haque, A and Jeelani, S., "Effect of Rib Geometry on the Buckling Behavior of Composite Isogrid Cylinders," 12th International Conference on Composite Materials (ICCM-12), Palais Des Congress, Paris, July 5-9, 1999, Presented and published in the proceeding.
  8. Mahfuz, H., Zhu, Y., Haque, A. and Jeelani, S., "Response of Integral Armor Under High Velocity Impact - An Experimental and Finite Element Study," 12th International Conference on Composite Materials (ICCM-12), Palais Des Congress, Paris, July 5-9, 1999, Presented and published in the proceeding.
  9. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F. and Jeelani, S., "Innovative Manufacturing and Stability Analysis of Composite Skin-Stringer Assembly," ASME Winter Annual Meeting, New Orleans, Louisiana, November 2002, presented at the conference.
  10. Mahfuz, H., Chakravarty, U., Saha, M. and Jeelani, S., "Microstructure, Density and Strain Rate Effects on Sandwich Core Materials," ASME Winter Annual Meeting, New Orleans, Louisiana, November 2002, presented at the conference.
  11. Islam, M., Mahfuz, H., Motuku, M., Saha, M., and Jeelani, S., "Manufacturing and Analysis of 3-D Woven Sandwich Composites under Compressive Loading with Acoustic Emission Monitoring," ASME Winter Annual Meeting, New Orleans, Louisiana, November 2002, presented at the conference.
  12. Mahfuz, H., Hasan, ABM., Saha, M. and Jeelani, S., "Failure Prediction of Flip Chip Packages using Finite Element Technique," ASME Winter Annual Meeting, New Orleans, Louisiana, November 2002, presented at the conference.
  13. Saha, M., Mahfuz, H., Joarder, C. and Jeelani, S., "Finite Element Analysis of Integral Sandwich Tee Joints under Tension," 10th International Conference on Composites/Nano Engineering, New Orleans, Louisiana, July 2003, presented in the conference.
  14. Mahfuz, H., Clements, F., and Stewart, J., "Functionalization of Silica Nanoparticles to improve Stab Resistance of Kevlar Fabrics," SES 2006, University Park, PA, August 13-16, 2006, presented at the conference.

College of Engineering and Computer Science

The College of Engineering and Computer Science offers majors in areas of national priority such as artificial intelligence, cybersecurity, transportation and supply chain management.

Contact Us

location_on
Florida Atlantic University
777 Glades Road
Boca Raton, FL 33431
call (561) 297-3400
mail info@eng.fau.edu

Follow Us